MAN 81252256060 TAILLAMP
Product Specifications
Product quality
OEM Equivalent Grade
Wholesale price USD
$11.31
Wholesale price CNY
¥76.8
bolt MOQ (Minimal order)
50 pcs
local_shipping Production time
30-45 days
package_2 Shipping Weight:
—
swap_horiz
Application (cross references) 1
expand_more
| MAN | 81252256060 |
Overview & Operating Principle
▲
The TAILLAMP is an automotive lighting component responsible for providing legally required illumination for road ahead visibility, signalling intent to other road users, and marking the vehicle's position and dimensions on the road. Lighting assemblies must comply with local road traffic regulations regarding light output, beam pattern, colour, and activation logic — always verify that the replacement unit meets the legal requirements for the destination market.
Lighting components in this category are supplied as complete assemblies including the housing, lens, reflector, and all required connectors. They are manufactured to OEM-equivalent optical and mechanical standards and mount directly to the vehicle body without modification.
Verify the vehicle make, model, year, and body style (pre-facelift vs. facelift) before ordering. Headlamp and taillamp assemblies are frequently revised mid-production run and are not interchangeable between production periods even on the same vehicle model.
Symptoms & Diagnostics
▲
One or more lights not illuminating despite new bulbs fitted — indicates a fault in the lamp assembly, wiring, or control module.
Warning lamp on the instrument cluster for a lighting system fault — triggered when the control module detects an open circuit or out-of-range current draw.
Condensation or water ingress inside the lens — indicates a failed housing seal allowing moisture to enter and degrade reflector coating.
Cracked, yellowed, or clouded lens reducing light output below legal minimum.
Intermittent lighting function — caused by a failing connector, corroded socket, or cracked printed circuit board inside the assembly.
Failed self-levelling or adaptive function — indicates a failed actuator motor or control circuit within the headlamp assembly.
Logistics & Customs
▲
International HS Code
8512.20
EAEU Customs Code (TN VED)
8512 20 000 0
Typical Net Weight
0.5–4.0 kg
Country of Manufacture
China
Standard MOQ
300 pcs
Production Lead Time
60 days
Always verify the exact 8-digit or 10-digit subheading with your customs broker for the destination country, as tariff schedules and duty rates vary by jurisdiction.
Installation Tips
▲
- Verify the correct assembly for the vehicle specification — left-hand drive vs. right-hand drive beam pattern, xenon vs. halogen, LED vs. halogen. Incorrect beam pattern is illegal and a road safety hazard.
- Disconnect the battery before removing lamp assemblies to avoid triggering fault codes in the lighting control module.
- Carefully disconnect all electrical connectors before pulling the assembly. Headlamp assemblies often have multiple connectors for main beam, dipped beam, position lights, and actuators.
- Transfer any reusable components from the old assembly to the new one as required (washer motor, bulbs in halogen units, etc.).
- Check all mounting bolts and adjust the assembly for flush fitment against the body panel before final tightening.
- Verify beam alignment after headlamp replacement using a beam-setting screen or workshop headlamp aimer. Misaligned headlamps dazzle oncoming traffic and reduce road illumination.
Tools: trim removal tools, torque wrench, headlamp aiming screen or workshop aimer, OBD-II scanner for fault code clearing, multimeter.
Frequently Asked Questions
▲
Do LED headlamp assemblies require ECU coding?
LED and adaptive headlamp assemblies on modern vehicles frequently require ECU coding after replacement to configure the control module for the new unit. This is particularly common on vehicles with adaptive lighting, AFS (adaptive front-lighting system), or automatic levelling. Check the individual product page for application-specific requirements.
Can I replace one headlamp assembly without replacing the other?
Yes, but if both assemblies are the same age and mileage, consider replacing both simultaneously. Headlamp lenses yellow and degrade at similar rates — a new assembly alongside a heavily yellowed old one creates a noticeable visual mismatch and uneven illumination.
How does the OEM-equivalent aftermarket unit compare to the genuine OEM part?
OEM-equivalent grade units in this catalogue are manufactured to replicate the current OEM design geometry and material specification. Quality is verified against OEM cross-reference data. When ordering in bulk, confirm with our team that the specification matches the latest OEM revision for your application.
Is white-label or custom packaging available for wholesale orders?
Yes. ok.parts works directly with the manufacturing facility and can accommodate neutral white-label packaging or fully branded packaging with your company logo, part numbers, and barcode. Minimum order quantities and lead times for custom packaging may differ from standard stock. Contact the team via the inquiry form to discuss your specific requirements.
Frequently Replaced Together