TOYOTA/LEXUS 4333039195 BALL JOINT
Product Specifications
Product quality
OEM Equivalent Grade
Wholesale price USD
$3.59
Wholesale price CNY
¥24.3
bolt MOQ (Minimal order)
1 pcs
local_shipping Production time
30-45 days
package_2 Shipping Weight:
—
swap_horiz
Application (cross references) 18
expand_more
| TOYOTA/LEXUS | 4333039195 |
| TOYOTA/LEXUS | 4333039265 |
| TOYOTA/LEXUS | 4334039235 |
| TOYOTA/LEXUS | 4333039245 |
| TOYOTA/LEXUS | 4334039225 |
| TOYOTA/LEXUS | 4333039255 |
| TOYOTA/LEXUS | 4333039295 |
| TOYOTA/LEXUS | 4334039245 |
| TOYOTA/LEXUS | 4334039175 |
| TOYOTA/LEXUS | 4333029105 |
| TOYOTA/LEXUS | 4333029215 |
| TOYOTA/LEXUS | 4333029305 |
| TOYOTA/LEXUS | 4333029345 |
| TOYOTA/LEXUS | 4333039835 |
| TOYOTA/LEXUS | 4333030445 |
| TOYOTA/LEXUS | J4333039295 |
| LYNXAUTO | C1068LR |
| MILES | DB35106 |
Overview & Operating Principle
▲
The BALL JOINT is a load-bearing articulating joint that connects the suspension control arm to the steering knuckle, allowing the knuckle to rotate freely about the steering axis during steering inputs while simultaneously transmitting the full lateral, longitudinal, and vertical suspension loads between the knuckle and the control arm through the suspension's travel range. The assembly consists of a hardened chromium steel ball stud whose spherical head is retained in a precisely matched PTFE-lined or acetal polymer bearing socket under a calibrated preload, housed in a forged or cold-formed steel housing that is either pressed into the control arm bore, bolted to the control arm flange, or integrated into the arm as a factory-assembled unit. A rubber or thermoplastic dust boot sealed at both ends retains a lifetime grease fill within the socket cavity and prevents road water, salt, and abrasive debris from contacting the ball surface — the boot is the joint's primary protection against premature wear and its integrity is the single most important factor in service life. The ball stud's tapered shank presses into the conical bore of the steering knuckle steering arm and is secured by a castle nut and split pin, transmitting all suspension forces through the interference fit of the taper without relying on the nut thread for load carrying.
This unit — TOYOTA/LEXUS 4333039195 — is manufactured to OEM-equivalent specifications: ball stud taper angle and diameter, socket bearing insert material and preload, housing press-fit or bolt-flange geometry for control arm installation, ball stud articulation angle and torque, dust boot material and clamp profile, and overall stud-to-housing length are matched to the original part. Supplied as a direct replacement for standard fitment. Available wholesale from 3.59 USD, MOQ 1 pcs, production lead time 30-45 days.
Ball joints fail through socket bearing insert wear producing axial and radial play in the ball stud, boot failure allowing abrasive contamination to accelerate socket wear, and ball stud corrosion in road salt environments that prevents the taper from seating correctly in the knuckle bore. A ball joint with measurable axial play is a critical safety item — under heavy braking or cornering loads the worn joint deflects, altering the wheel's camber and caster angles dynamically and producing unpredictable vehicle response; at the extreme end of wear, a ball joint that has lost all socket preload can disengage from the knuckle under rebound travel, resulting in complete loss of steering control of the affected wheel.
Symptoms & Diagnostics
▲
Clunking or knocking noise from the front suspension over speed bumps, potholes, or during low-speed steering lock-to-lock — axial play in the ball joint allows the ball stud to impact the socket housing walls under vertical and lateral impact loading; the noise is most prominent at low speeds where road inputs are absorbed without dampening by the suspension; confirm by grasping the wheel at 12 and 6 o'clock and rocking vertically while an assistant watches the ball joint for movement.
Vague or wandering steering combined with the vehicle pulling to one side under braking — a worn lower ball joint is allowing dynamic camber change under braking load that shifts the affected wheel's contact patch geometry; the pull is toward the side with greater camber change and reverses or worsens with road camber changes.
Rapid and uneven tyre wear — feathering or sawtooth pattern on inner or outer tread edge — dynamic camber variation from ball joint play is producing a continuous slip angle at the tyre contact patch that the alignment setting cannot compensate for because the geometry changes under load rather than at static rest.
Torn, split, or collapsed rubber boot visible on inspection with the wheel at full lock — a damaged boot has exposed the ball socket to road contamination; a boot that has been torn for any significant mileage will have accelerated socket wear from abrasive grit; replace the ball joint regardless of how little play is currently measurable — the contamination-accelerated wear rate means measurable play will develop rapidly.
Measurable axial play detected during inspection with a dial gauge or by hand with the wheel loaded — jack the vehicle under the control arm to load the ball joint, then grasp the wheel at 12 and 6 o'clock and attempt to rock vertically; any visible movement at the ball joint taper in the knuckle, or movement measured with a dial gauge at the wheel rim, exceeding 1–2 mm indicates the joint has exceeded its wear limit.
Ball joint that has pulled through the knuckle taper or control arm bore — a catastrophically failed joint where the ball stud has disengaged from the taper under rebound or cornering load; this failure results in the wheel adopting an extreme camber angle and the vehicle becoming unsteerable on the affected corner; this is a complete loss of vehicle control emergency requiring immediate towing.
Logistics & Customs
▲
International HS Code
8708.80
EAEU Customs Code (TN VED)
8708 80 350 0
Typical Net Weight
Country of Manufacture
China
Standard MOQ
1 pcs
Production Lead Time
30-45 days
Always verify the exact 8-digit or 10-digit subheading with your customs broker for the destination country, as tariff schedules and duty rates vary by jurisdiction.
Installation Tips
▲
- Support the lower control arm on a workshop jack before disconnecting the ball joint — the control arm is under suspension spring load and will drop abruptly when the ball stud taper is released from the knuckle; support the arm at its natural ride-height position before releasing the taper to prevent sudden arm drop that over-extends the CV joint and stretches brake hoses and ABS wiring beyond their travel limit.
- Release the ball stud taper using the correct ball joint separator tool — never strike the knuckle boss with a hammer to free the taper; hammer blows crack the knuckle boss, damage the new ball joint's taper bore, and transmit shock loads to the wheel bearing; use a jaw-type or fork-type separator that applies progressive wedge force to the taper joint until it releases cleanly with a distinctive pop.
- On press-fit ball joints, use a ball joint press tool of the correct cup dimensions to remove and install the joint in the control arm bore — pressing the old joint out and the new joint in with incorrect cup sizes collapses the housing, distorts the control arm bore, or damages the new boot; confirm the press cup outer diameter matches the control arm bore diameter and the driver cup diameter matches the joint housing outer diameter before applying press force.
- Clean the knuckle taper bore thoroughly before installing the new ball stud — corrosion, debris, and metal transfer from the old taper must be removed with a fine file or bore reamer; a contaminated or deformed taper bore prevents the new ball stud from seating to its full contact depth, reducing the effective thread engagement of the castle nut and creating a stress concentration at the shallow-seated taper that risks stud pull-through under cornering loads.
- Torque the castle nut to OEM specification with the suspension loaded at ride height — tightening the nut with the suspension hanging pre-twists the boot and loads the socket in a direction that accelerates bearing insert wear; always load the suspension to ride height before final torquing by placing a jack under the control arm; fit a new split pin and always advance the nut to the next alignment position — never back off to align the split pin hole.
- Install the new BALL JOINT (TOYOTA/LEXUS 4333039195), torque the castle nut and fit a new split pin, lower the vehicle to ride height and torque any press-fit retention bolt to specification, have a four-wheel alignment performed immediately — ball joint replacement affects camber and caster — and confirm alignment is within OEM specification before the vehicle is returned to service.
Tools: ball joint press tool set with correct cup dimensions, ball joint separator, workshop jack, torque wrench, new split pin, castle nut socket, four-wheel alignment equipment.
Frequently Asked Questions
▲
Should both front lower ball joints be replaced simultaneously when only one has failed?
Replacing both lower ball joints simultaneously is strongly recommended on vehicles above 80,000 km when one joint has failed from general wear rather than a specific damage event. Both joints share identical operating conditions and mileage — if one has reached the wear limit, the opposite joint is at the same wear stage and will typically develop measurable play within a short interval. Replacing both during a single control arm access and alignment operation eliminates a repeat alignment fee within a short period and ensures matched lateral stiffness on both corners, which affects straight-line stability. ok.parts supplies ball joints individually and in axle pairs at wholesale MOQ from 3.59 USD per unit.
Is wheel alignment always required after ball joint replacement, and which angles are affected?
Wheel alignment is mandatory without exception after lower ball joint replacement. The ball joint defines the lower pivot point of the steering axis — its position relative to the upper mount or strut top mount determines caster, and its position in the control arm bore determines camber. Any variation in the new joint's press-fit depth or the minor assembly differences between old and new joints shifts both camber and caster from their previous settings. A full four-wheel alignment must be performed and all adjustable angles set to OEM specification before the vehicle is returned — never release a vehicle after ball joint replacement without confirmed alignment.
How does the OEM-equivalent aftermarket unit compare to the genuine OEM part?
OEM-equivalent units in this catalogue replicate the current OEM design geometry and material specification. Quality is verified against OEM cross-reference data. When ordering in bulk, confirm with our team that the specification matches the latest OEM revision for your application.
Is white-label or custom packaging available for wholesale orders?
Yes. ok.parts works directly with the manufacturing facility and can accommodate neutral white-label packaging or fully branded packaging with your company logo, part numbers, and barcode. Minimum order quantities and lead times for custom packaging may differ from standard stock. Contact the team via the inquiry form to discuss your specific requirements.
Frequently Replaced Together
▲
| Part | Reason for Combined Replacement |
|---|---|
| Lower Control Arm OEM ref. varies by suspension design | On vehicles where the lower ball joint is supplied pre-pressed into the control arm as a non-serviceable integrated assembly, the complete control arm must be replaced when the ball joint has worn. On vehicles with separately replaceable press-fit ball joints, inspect the control arm bushing compliance bushes for rubber cracking and loss of compliance while the arm is fully accessible during ball joint replacement — worn bushings produce the same clunking and imprecise steering symptoms as a worn ball joint and should be replaced simultaneously to avoid a repeat control arm removal within a short interval. |
| Stabiliser Bar Link OEM ref. varies by axle position | The stabiliser bar drop link connects the stabiliser bar to the lower control arm at a point adjacent to the ball joint and is fully accessible during ball joint replacement. Drop links have the same ball joint construction as the suspension ball joint and wear at a similar rate — inspect the drop link ball joints for play and boot condition while the control arm is accessible, and replace any showing wear or boot damage simultaneously with the ball joint. |
| Steering Knuckle OEM ref. varies by axle position | Repeated ball joint replacements on the same vehicle can enlarge or damage the conical taper bore in the steering knuckle steering arm through repeated taper seating and removal cycles. If the knuckle taper bore shows deformation, elongation, or surface damage from previous ball joint hammer removal, the bore cannot grip the new ball stud taper correctly and the risk of stud pull-through under load is significantly elevated. Inspect and replace the knuckle if taper bore damage is found rather than fitting a new ball joint to a compromised bore. |