2011-2012 AUDI A4 A5 S4 S5 Q5 10PC QUATTRO KIT FRONT LOWER UPPER CONTROL ARM
iFJF part No.: CA-0004. Product Overview Restore your Audi's legendary handling and ride quality with the iFJF 10-Piece Front Suspension Control Arm Kit precision-engineered for 2011 2012 Audi A4, A5, S4, S5, and Q5 Quattro models. This complete kit replaces all eight front control arms (upper + lower, left + right) plus both stabilizer end links in a single package, saving you hundreds compared to buying individual arms from the dealer. Each control arm is manufactured using advanced forging, casting, stamping, and robotic welding processes to ensure OEM-level fitment and durability. Pre-installed rubber bushings and ball joints mean no pressing required bolt on and go. What's Included (10 Pieces) Position Part Number Thread Front Left Lower Rearward RK622786 M14 1.5 Front Right Lower Rearward RK622650 M14 1.5 Front Left Lower Front RK641152 Front Right Lower Front RK641153 Front Left Upper Rear + Ball Joint RK621000 Front Right Upper Rear + Ball Joint RK620999 Front Left Upper Front + Ball Joint RK621002 Front Right Upper Front + Ball Joint RK621001 Front Stabilizer Links ( 2) K750359 Note: 17mm ball joint thread = M14 1.5. A 16mm (M12 1.5) version is also available please verify before ordering. Vehicle Compatibility Year Model Drivetrain 2011 2012 Audi A4 / A5 Quattro AWD 2011 Audi S4 Quattro AWD 2011 2012 Audi Q5 Quattro AWD Key Features 100% New Components Never remanufactured or rebuilt Forged Steel Construction Superior strength vs. stamped OEM arms Pre-Installed Rubber Bushings Absorb vibration & road noise Pre-Lubed Ball Joints Ready to install, no grease required Precision-Machined Mounting Holes Guaranteed proper bolt alignment OEM-Spec Torque Tolerance Meets or exceeds factory standards Symptoms of Worn Control Arms Clunking or knocking noise over bumps Steering wheel vibration at highway speeds Uneven or rapid tire wear (especially inner edges) Loose or wandering steering feel Visible cracks in rubber bushings Installation Notes Professional installation recommended. A wheel alignment is mandatory after control arm replacement. Typical install time: 3 4 hours with basic hand tools and a lift. All hardware is pre-greased from the factory no additional lubrication needed before install. Why Choose iFJF? 10-Piece Complete Kit Everything you need in one box OEM+ Quality Built to the same geometry as factory parts with upgraded materials Cost Savings Typically 40 60% less than dealer pricing for the full set Fast Shipping Ships from US warehouse within 1 business day Frequently Asked Questions Q: Will this fit my 2011 Audi A4 without Quattro? A: No, this kit is designed specifically for Quattro (AWD) models. FWD (front-wheel drive) models use different control arm geometry. Q: Are the ball joints pre-greased? A: Yes, all ball joints come pre-lubricated from the factory and are maintenance-free for their service life. Q: What's the difference between the M14 and M12 versions? A: The ball joint stud thread size. 17mm nut = M14 1.5 (this listing). 16mm nut = M12 1.5 (available in our other listing). Measure your existing ball joint nut before ordering. Q: Do I need a wheel alignment after installing? A: Absolutely. Any control arm replacement changes suspension geometry. A professional 4-wheel alignment is required immediately after installation. Q: How long will these control arms last? A: With normal driving conditions, expect 60,000 100,000 miles of service life. Related Products Shop All Suspension Parts BMW X5/X6 Front Contro
directions_car Application (cross references)
1| Brand | OEM | |
|---|---|---|
| UNKNOWN | CA0004 | View offers |