PRE-FUEL FILTER ASSEMBLY FOR PERKINS 403D/404D/1103 DIESEL ENGINES 130306380

iFJF part No.: FJ-130306380. Product Overview Protect your fuel injection system with the Pre-Fuel Filter Assembly for Perkins 403D/404D/1103 Diesel Engines 130306380 from iFJF. This premium fuel filter delivers superior contaminant removal, safeguarding your injectors, injection pump, and entire fuel system from harmful debris, water, and particulate matter. Engineered as a direct OEM replacement for OEM specification , this filter features high-efficiency filtration media that captures particles as small as 30 microns. Whether you're maintaining a daily driver, work truck, or fleet vehicle, this filter ensures clean fuel delivery at every RPM. Key Features 30 Micron Filtration: High-efficiency media captures contaminants before they reach your injection system Water Separation: Separates emulsified water from diesel fuel, protecting injectors from corrosion High Flow Rate: Maintains proper fuel flow under high-demand conditions towing, hauling, highway driving Durable Construction: Heavy-duty canister resistant to pressure spikes and vibration Direct OEM Fit: Exact dimensions, thread pattern, and gasket seal match the factory filter Multi-Fuel Compatible: Works with ULSD, biodiesel blends up to B20, and gasoline Specifications Specification Detail Part Type Fuel Filter / Fuel Water Separator Filtration Rating 30 Micron Nominal Media Type High-Efficiency Cellulose/Synthetic Blend OEM Cross-Reference OEM specification Fuel Type Diesel / Gasoline / Biodiesel (up to B20) Service Interval Every 15,000-25,000 miles or 12 months Installation Guide Safety First: Park on level ground, engage parking brake, allow engine to cool Relieve Pressure: Open fuel cap to relieve tank pressure Remove Old Filter: Use filter wrench if needed have catch pan ready for fuel spillage Clean Surface: Wipe filter housing clean of debris and old gasket material Lubricate Gasket: Apply thin film of clean diesel to new filter's gasket Install: Hand-tighten until gasket contacts, then 3/4 turn more Prime System: Turn ignition ON (without starting) for 30 seconds, repeat 2-3 times Check: Start engine and check for leaks Why Choose iFJF Filters? Quality Tested: Every filter undergoes burst pressure, efficiency, and flow rate testing US-Based Support: Ships from US warehouses with real tracking Best Value: OEM-equivalent quality at a fraction of dealer pricing 30-Day Guarantee: Not satisfied? Free replacement or full refund Frequently Asked Questions Q: How often should I replace this fuel filter? A: For diesel engines: replace every 15,000-25,000 miles or annually. For vehicles operating in dusty conditions or using biodiesel, change every 10,000-15,000 miles. Q: Is this a direct OEM replacement? A: Yes. Manufactured to meet or exceed OEM specifications for fit, filtration efficiency, and flow rate. Direct drop-in replacement. Q: What micron rating is this filter? A: This filter has a 30 micron filtration rating, providing excellent contaminant removal while maintaining proper fuel flow. Q: Can I use this with biodiesel? A: Yes, compatible with diesel up to B20 biodiesel blends. For B20+, more frequent changes recommended due to biodiesel's solvent properties. Q: What are signs of a clogged fuel filter? A: Hard starting, rough idle, hesitation under acceleration, decreased fuel economy, and check engine light. Replace immediately if you notice these. Q: What's included in the package? A: The package includes the fuel filter element(s) as described in the title and prod