DOOR BUSHING REMOVAL TOOL HINGE LINERS FOR WRANGLER JK JKU JL JLU GLADIATOR JT 2007-2022
iFJF part No.: FJ-JP-DR-GE-ZH2. iFJF Door Bushing Removal Tool & Hinge Liner Rebuild Kit for Jeep Wrangler JK/JL/Gladiator JT 2007-2022 The iFJF Professional Hinge Rebuild Kit is the most comprehensive door bushing service solution in our lineup. Combining a heavy-duty stainless steel removal tool with a full set of plastic hinge liner pins, this kit gives you everything needed to completely rebuild the door hinges on your 2007-2022 Jeep Wrangler or Gladiator. Whether your doors are squeaking, rattling, sagging, or just not closing like they used to, this kit restores factory-smooth operation in a single afternoon of DIY work. Key Features Complete Hinge Rebuild Kit: One heavy-duty stainless steel removal tool plus a full set of replacement plastic hinge liner pins for a complete hinge bushing replacement. Nothing else to buy everything needed is in the box. Fixes All Door Hinge Problems: Eliminates squeaky hinges, rattling door panels, loose/sagging doors, and difficult door closure. All symptoms trace back to worn, corroded, or swollen OE hinge bushings that this kit is designed to replace. Reusable Stainless Steel Tool: The removal tool is built from rugged stainless steel for long-term durability. Use it on your Jeep today, loan it to a friend tomorrow, and use it again in 5 years the tool maintains its shape and function through repeated use. Updated 2007-2022 Coverage: This version of the kit extends compatibility through the 2022 model year, covering the latest JL and Gladiator JT models. The hinge design remained consistent, so the tool works across all years. Simple Hammer Installation: No press, no special tools, no mechanic required. Align the tool, tap with a standard hammer to drive out the old bushing, tap in the new plastic liner pin with a rubber mallet. It's that straightforward. 2-Year iFJF Warranty: Built to professional standards and backed by our quality guarantee. Vehicle Fitment Jeep Wrangler JK (2007-2018): 2-door, all trims Jeep Wrangler JKU (2007-2018): 4-door, all trims Jeep Wrangler JL (2018-2022): 2-door, all trims Jeep Wrangler JLU (2018-2022): 4-door, all trims Jeep Gladiator JT (2020-2022): All trims NOT compatible: TJ (1997-2006), YJ (1987-1995), or CJ models Installation Guide Remove Door Hinge Pins: Safely support the door (or have a helper hold it). Remove the hinge pins note which position each pin came from. Drive Out Old Bushings: Place the iFJF removal tool over the top of each hinge. Tap firmly with a hammer until the OE liner pins are fully driven out of the hinge bore. Clean Hinge Bores: Remove all rust and debris from the hinge bores using a wire brush. Apply a light coat of grease or lubricant to the clean bore. Install New Liner Pins: Tap the new plastic hinge liner pins into each hinge bore using a rubber mallet. Ensure they are fully and evenly seated. Reinstall the Door: Rehang the door and reinsert hinge pins. Test for smooth, rattle-free operation. Protect Your Paint: Always place a shop towel, piece of cardboard, or rubber mat under the hinge area before hammering. A few seconds of protection prevents an accidental hammer slip from chipping your paint. The Real Cost of Ignoring Worn Hinge Bushings Door hinge bushings might seem like a minor, cosmetic issue, but ignoring them can lead to real problems. When bushings wear out, the door's weight shifts from the bushing surface to the steel hinge pin riding directly against the steel hinge bore metal on metal. This accelerates wear on the
directions_car Aplicação (referências cruzadas)
1| Marca | OEM | |
|---|---|---|
| UNKNOWN | FJJPDRGEZH2 | Veja as ofertas |