802893Q01 FUEL WATER SEPARATOR KIT 10 MICRON FOR MARINE SPIN-ON COMBO

iFJF part No.: FJ-WSFF02. Product Overview The 802893Q01 is a complete fuel water separator kit designed for marine gasoline and diesel engines. This all-in-one package includes a 10-micron spin-on filter element and the mounting filter head with ports everything needed to install or upgrade your boat's fuel filtration system. Protects your engine from water-contaminated fuel, the leading cause of marine engine failures. Compatible with Mercury, Mercruiser, Volvo Penta, and most marine engines. Key Features Complete Kit : Includes 10-micron spin-on filter element AND mounting head/base with 1/4" NPT ports. Ready to install no separate parts to source. 10-Micron Water Separation : Advanced hydrophobic filter media traps water droplets and particulates as small as 10 microns. Clear bowl allows visual water-level inspection before each outing. Universal Marine Application : Compatible with most marine gasoline and diesel engines. Replaces Mercury 35-807172, 35-60494-1, and Quicksilver 802893Q01 filter systems. Corrosion-Resistant Construction : Marine-grade aluminum head with anti-corrosion coating. Spin-on canister with factory-applied gasket lubricant. Built for saltwater environments. Easy Installation : Mount the head in-line on your fuel system, spin on the filter, connect fuel lines. Complete installation in under 30 minutes with basic tools. Compatibility Application Details Marine Gas Engines Mercruiser 3.0L-8.2L, Volvo Penta, Indmar, PCM Marine Diesel Engines Yanmar, Volvo Penta D-Series, Cummins MerCruiser Diesel Generator Sets Kohler, Westerbeke, Onan, Northern Lights Specifications Specification Value Part Number 802893Q01 Replaces 18-7983-1, 35-807172, 35-60494-1, 18-7944 Micron Rating 10 Micron Nominal Kit Contents Mounting Head + Spin-On Filter Element Port Size 1/4" NPT (Female) Flow Rate Up to 90 GPH (340 LPH) Why Choose iFJF Water in fuel is the #1 cause of marine engine failures. The 802893Q01 provides complete fuel system protection with both filter element and mounting head ideal for upgrading older boats or replacing worn Mercury/Mercruiser systems. Don't let a $50 filter issue turn into a $5,000 engine repair. Frequently Asked Questions Q: Does this kit include the mounting head? A: Yes complete kit with spin-on filter AND aluminum mounting head with 1/4" NPT ports. Q: Will this work with my Mercruiser 5.0L? A: Yes. Compatible with Mercruiser 3.0L-8.2L, Volvo Penta, and most marine engines. Q: How do I know when to drain water? A: Check clear bowl before each outing. Water settles below fuel. Drain using bottom valve. Q: Can I install this myself? A: Yes. Mount head, connect fuel lines, pre-fill filter, spin on, check for leaks. ~30 minute DIY. Q: How often should I replace? A: Every 100 hours or annually. With ethanol fuel or humidity, replace every 50 hours.