HPOP QUICK DISCONNECT TOOL FOR FORD 6.0L & 7.3L POWERSTROKE DIESEL OIL PUMP LINE REMOVER
iFJF part No.: FJ-FORD22-CK. HPOP Quick Disconnect Tool Ford 6.0L & 7.3L Powerstroke Diesel The iFJF HPOP (High Pressure Oil Pump) quick disconnect tool is a must-have for any Ford Powerstroke diesel owner or technician. This specialized tool safely releases the stubborn quick-connect fittings on the HPOP lines preventing damage to expensive OEM hoses and fittings. Whether you're replacing injectors, upgrading to an aftermarket HPOP, or chasing a high-pressure oil leak, this tool pays for itself on the first use. Key Features Vehicle-Specific Design: Engineered specifically for Ford 6.0L and 7.3L Powerstroke HPOP line fittings Prevents Damage: Safely releases the spring-lock connector without scratching or deforming the fitting Hardened Steel Construction: Heat-treated tool steel for long service life in professional shop environments Ergonomic Design: Compact profile fits into the tight engine bay of Super Duty trucks and E-Series vans Essential for HPOP Service: Required for injector replacement, HPOP upgrades, STC fitting repairs, and oil leak diagnosis Two-Engine Coverage: Works on both 7.3L (1994.5 2003) and 6.0L (2003 2010) Powerstroke engines Compatibility Vehicle Engine Year Range Ford F-250/F-350 Super Duty 7.3L Powerstroke 1999 2003 Ford F-250/F-350/F-450/F-550 6.0L Powerstroke 2003 2010 Ford Excursion 6.0L / 7.3L 2000 2005 Ford E-250/E-350/E-450 6.0L / 7.3L 1999 2010 International T444E 7.3L (equivalent) 1994.5 2003 Specifications Specification Value Material Heat-treated tool steel Application HPOP quick-connect line fittings Engine Compatibility Ford 6.0L & 7.3L Powerstroke Finish Black oxide (corrosion-resistant) Common Jobs Requiring This Tool Injector Replacement: HPOP lines must be disconnected to access injectors on both 7.3L and 6.0L engines HPOP Upgrade: Installing an aftermarket high-output HPOP (Adrenaline, Dieselsite, CNC Fabrication) STC Fitting Repair: 6.0L engines are notorious for STC (Snap-To-Connect) fitting failures this tool is required for the updated one-piece fitting HPOP Line Replacement: Upgrading to braided stainless HPOP lines for higher flow Oil Leak Diagnosis: Disconnecting lines to isolate high-pressure oil system leaks ICP Sensor Replacement: Accessing the Injection Control Pressure sensor on the HPOP cover Using the HPOP Disconnect Tool Remove the engine cover/intercooler tubing as needed for access Clean the quick-connect fitting area thoroughly to prevent debris from entering the oil system Slide the disconnect tool over the HPOP line, engaging the tool collar with the spring-lock ring Push the tool firmly toward the fitting while pulling slightly on the line the spring lock releases Once released, carefully pull the line away from the HPOP fitting Immediately cap or plug the open HPOP port to prevent contamination Pro Tip: On 6.0L engines, the passenger-side HPOP line fitting is notoriously difficult to access. Use a 90-degree pick in combination with this tool for the best angle in tight quarters. Frequently Asked Questions Q: Can I just use pliers or a screwdriver to release the HPOP fitting? A: Technically yes but you risk scratching the fitting bore (causing leaks), deforming the spring lock (making future removal harder), or breaking the plastic retainer. This $30 tool prevents $300+ in damaged parts. Q: Does this work on both the 7.3L and 6.0L? A: Yes! This tool is designed to work on HPOP quick-connect fittings on both the 7.3L Powerstroke (1994.5 2003) and 6.0L Powerstroke (2003 2010
directions_car Aplicación (referencias cruzadas)
1| Marca | OEM | |
|---|---|---|
| UNKNOWN | FJFORD22CK | Ver ofertas |