6PK925 SERPENTINE BELT 36.42" 6-RIB FOR VIBE, COROLLA EPDM
iFJF part No.: FJ-PD6-925. Reference: UNKNOWN 6PK925. iFJF 6PK925 Serpentine Belt 6 Ribs 36.42" (925mm) EPDM Drive Belt The iFJF 6PK925 Serpentine Belt is a precision-engineered 6-rib EPDM drive belt designed to deliver reliable power transmission across your vehicle's accessory drive system. Measuring 36.42 inches (925mm) in effective length with 6 ribs, this serpentine belt replaces OE part number 6PK925 and fits 2+ vehicle applications including Vibe, Corolla (2009-2013). Key Features & Benefits Premium EPDM Rubber Compound: Ethylene Propylene Diene Monomer (EPDM) construction provides superior resistance to heat, ozone, and cracking outlasting traditional neoprene belts by up to 2 in extreme engine bay temperatures. 6-Rib Precision Profile: Exact rib geometry ensures full-contact grip on all pulleys, eliminating slippage and squeal even under high-load conditions. OE-Spec Dimensions: 36.42" effective length 6 ribs matches OEM specifications for 6PK925 applications, guaranteeing drop-in fitment without adjustment. Quiet Operation: Precision-molded ribs and high-modulus tensile cords minimize vibration and noise for smooth, quiet accessory drive performance. Extended Service Life: Engineered for 50,000-100,000 mile service intervals under normal operating conditions reduces maintenance downtime. Universal Accessory Drive Compatibility: Powers alternator, power steering pump, A/C compressor, and water pump simultaneously through a single belt system. Vehicle Compatibility Vehicle Model Year Range Application Vibe 2009-2010 Serpentine Belt Drive System Corolla 2011, 2013 Serpentine Belt Drive System Always verify belt length and rib count match your vehicle's specification before ordering. Check your owner's manual or measure your existing belt. Technical Specifications Part Number 6PK925 Belt Type Serpentine (Multi-Rib) Rib Count 6 Ribs Effective Length 36.42" (925 mm) Material EPDM Rubber with High-Modulus Tensile Cords Temperature Range -40 F to +275 F (-40 C to +135 C) OE Reference 6PK925 Brand iFJF Direct Warranty 1-Year Limited Warranty When to Replace Your Serpentine Belt Most manufacturers recommend serpentine belt inspection at 60,000 miles and replacement by 90,000-100,000 miles . Replace immediately if you notice: Visible cracks, fraying, or glazing on the ribbed side Squealing or chirping noise from the engine bay (especially on startup or A/C engagement) Loss of power steering assist or A/C cooling performance Battery warning light (alternator not charging due to belt slip) Engine overheating (water pump not driven properly) Missing ribs or chunks of rubber on the belt surface Installation Tips Photograph the belt routing diagram (usually located on the radiator support or hood underside) before removal Use a serpentine belt tool or long-handled ratchet to release tensioner pressure Inspect all pulleys and tensioner for wear, noise, or bearing play replace if necessary Route the new belt following the diagram, leaving the tensioner pulley for last Double-check rib alignment on every pulley before starting the engine Start engine and verify smooth, quiet operation no squeal or wobble Frequently Asked Questions Q: Will this 6PK925 belt fit my vehicle? A: This 36.42" 6-rib serpentine belt is designed to fit: Vibe (2009-2010), Corolla (2011, 2013). Always verify your existing belt's rib count (6) and effective length (36.42") before ordering. If your vehicle requires a different length, search our store for the correct part num
directions_car Aplicación (referencias cruzadas)
1| Marca | OEM | |
|---|---|---|
| UNKNOWN | 6PK925 | Ver ofertas |