HEAVY DUTY 1" WHEEL WASHERS FOR POLARIS RZR RANGER 4/156MM TO 12MM (SET OF 4)
iFJF part No.: FJ-TOOL107-4. Heavy-Duty 1" Wheel Washers Polaris 4/156mm Wheel Adapter Kit (Set of 4) The iFJF 1-inch wheel washer kit solves a common Polaris off-road problem: mounting aftermarket 12mm-lug wheels onto factory 3/8" studs. These precision-machined billet aluminum spacers perfectly center 12mm lug-hole wheels on 3/8" studs, eliminating the dangerous wobble and vibration caused by the size mismatch. A must-have upgrade when running aftermarket wheels on your RZR or Ranger. Key Features Billet Aluminum Construction: 6061-T6 aluminum strong, lightweight, and corrosion-proof Perfect Centering: Machined to exact tolerances to center 12mm wheel holes on 3/8" studs 1-Inch Thickness: Provides stable wheel mounting without excessive track width change 4/156mm Bolt Pattern: Designed specifically for Polaris 4-lug hubs Set of 4: Complete kit for all four wheels on your machine Anodized Finish: Hard anodized for scratch resistance and long-term durability Compatibility Vehicle Year Range Bolt Pattern Polaris RZR 800 2008 2014 4/156mm Polaris RZR 900 / 900S / XP 1000 2014 2020 4/156mm Polaris Ranger 500 2008 2014 4/156mm Polaris Ranger 800 2008 2014 4/156mm Polaris General 1000 2016 2020 4/156mm Verify your bolt pattern is 4/156mm with 3/8" studs before ordering. Later model Polaris machines (2020+) may use M12 studs that don't require these washers. Specifications Specification Value Material 6061-T6 Billet Aluminum Thickness 1 inch (25.4mm) Inner Diameter 3/8" (9.5mm) fits factory studs Outer Diameter 12mm shoulder fits aftermarket wheels Bolt Pattern 4/156mm Quantity 4 washers (one per wheel) Finish Hard Anodized Why You Need These Washers Many popular aftermarket UTV wheels (Method, STI, ITP, System 3, Fuel) use 12mm lug holes but pre-2020 Polaris machines use 3/8" (9.5mm) studs. Without proper centering washers, the wheel can shift off-center, causing: Severe Vibration: Off-center wheels create dangerous high-speed wobble Lug Nut Loosening: Improper seating leads to nuts backing off under vibration Stud Damage: Concentrated stress can bend or shear wheel studs Uneven Tire Wear: Wobbling wheels create irregular tread wear patterns Installation Instructions Jack up the machine and secure with jack stands Remove the wheel (4 lug nuts) Slide one 1" washer onto each of the 4 wheel studs Mount the aftermarket wheel, ensuring the wheel seats against the washers not the hub Hand-start all 4 lug nuts to confirm proper alignment Torque lug nuts to Polaris specification (typically 90 100 ft-lbs) in a star pattern Repeat for all 4 wheels Re-torque lug nuts after the first 50 miles of riding Important: These washers add 1" of effective offset to each wheel. Verify your fender clearance before riding aggressively. Frequently Asked Questions Q: Do I need these for OEM Polaris wheels? A: No. OEM Polaris wheels already have 3/8" lug holes matched to the factory studs. These washers are only needed when mounting aftermarket wheels with 12mm lug holes. Q: Will this push my wheels out 1 inch? A: Yes. The washers add approximately 1" of effective wheel offset. Make sure your fender flares can accommodate the extra width especially if you're already running wider tires. Q: Can I use these on a 2021+ Polaris RZR? A: 2020 and newer Polaris models switched to M12 wheel studs from the factory, so these centering washers are typically not needed. Check your stud size first. Q: Do I need longer lug nuts? A: Most aftermarket wheels come with their own lug nu
directions_car Aplicación (referencias cruzadas)
1| Marca | OEM | |
|---|---|---|
| UNKNOWN | FJTOOL1074 | Ver ofertas |