FUEL FILTER ASSEMBLY 2013-2018 RAM 6.7L CUMMINS 2500-5500 | IFJF DIRECT

iFJF part No.: FJ-91AA-ZH. Fuel Filter Assembly 2013-2018 Ram 6.7L Cummins 2500-5500 68157290AB Complete Fuel Filter Assembly Direct Bolt-On Replacement This complete fuel filter assembly is designed as a direct OEM replacement for 6.7L Cummins applications. Pre-assembled and ready to install no need to piece together individual components. Each assembly includes the filter housing, element, O-rings, and mounting hardware for a hassle-free filter service. Key Features Complete Assembly Pre-assembled with housing, element, seals, and mounting hardware 10 Micron Filtration Multi-layer cellulose/synthetic media captures particles as small as 10 microns Water Separation Hydrophobic barrier strips emulsified water from diesel fuel, preventing injector corrosion OEM-Quality Construction Manufactured to ISO/TS 16949 quality standards with 100% end-of-line testing Direct Fit Precision-engineered to match OEM dimensions and mounting points no modifications required Corrosion Resistant Coated/plated components withstand diesel fuel, road salt, and moisture exposure Validated for Ram, Cummins Confirmed fitment across all listed applications Compatibility Make Engine Year Range Model Ram 6.7L Cummins 2013-2018 2500 Ram 6.7L Cummins 2013-2018 3500 Ram 6.7L Cummins 2013-2018 4500 Ram 6.7L Cummins 2013-2018 5500 Always verify fitment using the cross-reference part numbers below or contact our support team. Cross-Reference Part Numbers Brand Part Number Mopar 68157290AB Mopar 68157291AA Mopar 68157290AA Cummins 5303397 Fleetguard FS53006 Baldwin BF46239 Specifications Specification Value Part Number Fuel Brand iFJF Filtration Rating 10 Micron (Nominal) Media Type Cellulose/Synthetic Blend Product Type Fuel Filter Assembly Application 6.7L Cummins Vehicle Make Ram, Cummins Material Aluminum/Steel Country of Origin China (ISO Certified) Warranty 1 Year / Unlimited Mileage Installation Guide Relieve fuel system pressure Remove fuel cap and depressurize per vehicle service manual Remove old filter Unscrew filter housing cap, remove old element, drain housing into approved container Clean housing Wipe housing interior with clean lint-free cloth, inspect for debris or water Install new O-rings Lubricate new O-rings with clean diesel fuel, seat properly in grooves Insert new element Place new filter element into housing, ensuring proper orientation Reassemble and torque Reinstall cap to manufacturer torque spec (typically 25-35 Nm) Prime fuel system Cycle key to ON (not START) 3-5 times for 30 seconds each, or use manual primer pump Check for leaks Start engine, inspect housing and connections for fuel seepage Maintenance Schedule For optimal fuel system protection, replace your fuel filter every 15,000-25,000 miles (or every other oil change) under normal operating conditions. For severe service (heavy towing, dusty environments, high-idle operation), reduce interval to 10,000-15,000 miles . Always replace both primary and secondary filters as a set on two-stage filtration systems. Frequently Asked Questions Q: How often should I replace the fuel fuel filter? For 6.7L Cummins applications, we recommend replacing the fuel filter every 15,000-25,000 miles under normal driving conditions, or every 10,000-15,000 miles for severe service (towing, dusty environments, extended idling). Always replace both primary and secondary filters as a set. Q: What are the symptoms of a clogged fuel filter? Common signs include: hard starting or no-start condition, engine misfi