4PCS FRONT CONTROL ARM KIT FOR 2002-2005 BMW 745I/745LI E65/E66 RWD
iFJF part No.: CA-0017. 4PCS Front Lower Control Arm Kit for 2002-2005 BMW 745i/745Li E65/E66 RWD Restore your BMW 7 Series E65/E66 (2002-2005) handling precision with this iFJF 4-piece Front Lower Control Arm Kit. Manufactured from forged high-strength steel with pre-installed ball joints and OEM-spec rubber bushings, this kit eliminates steering clunks, vibrations, and wandering returning your flagship BMW to its legendary highway stability. This RWD-specific kit includes both forward and rearward lower control arms for a complete front-end refresh. Common Symptoms of Worn Control Arms Steering Vibration: Shimmy through the steering wheel at highway speeds (50-70 mph), especially noticeable under moderate braking Clunking Noise: Metallic thumping when driving over expansion joints, potholes, or uneven pavement Steering Wander: Vehicle feels loose and requires constant steering corrections to maintain lane position Uneven Tire Wear: Inner edge tire wear pattern classic sign of worn lower control arm bushings on BMW platforms Brake Shimmy: Front-end vibration during braking not caused by warped rotors worn tension strut bushings are a common culprit Key Features Forged High-Strength Steel: Exceeds OEM strength requirements engineered to handle the weight and dynamics of the E65/E66 7 Series platform Pre-Installed Ball Joints: Factory-pressed, sealed, and pre-lubricated no pressing tools or assembly required before installation OEM-Spec Rubber Bushings: Matches BMW factory durometer for the ideal balance of ride isolation and steering precision expected from a 7 Series Complete 4-Piece Kit: Includes both front lower forward control arms (left + right) and both front lower rearward control arms (left + right) E-Coated Finish: Electrophoretic corrosion protection resists rust and pitting even in winter driving conditions Compatibility Make Model Year Chassis Drivetrain BMW 745i / 745Li / 750i / 750Li / 760i / 760Li 2002-2005 E65 / E66 RWD Only Specifications Spec Detail Material Forged Steel, E-Coated Corrosion Protection Ball Joint Type Sealed, Maintenance-Free, Pre-Lubricated Bushing Material OEM-Spec Rubber (Factory Durometer) Kit Contents 4 Pieces Forward & Rearward Lower Control Arms (Left + Right) Warranty 2-Year / 24,000-Mile Limited Warranty Frequently Asked Questions Q: Should I replace all 4 arms at once? A: Yes. Control arm bushings on the E65/E66 platform wear at similar rates. Replacing all four saves on alignment costs and prevents old, worn bushings from compromising the performance of your new parts. Q: Will this restore original BMW handling? A: Yes. The OEM-spec rubber bushings and ball joint tolerances match BMW factory specifications. Your 7 Series should return to its signature blend of comfort and precision. Q: Is this compatible with air suspension? A: Yes. RWD E65/E66 models with air suspension use the same control arms as coil spring models. This kit fits both configurations. Q: What's included in the kit? A: 2x front lower forward control arms (driver + passenger) and 2x front lower rearward control arms (driver + passenger). All arms include pre-installed ball joints, rubber bushings, and mounting hardware. Q: Do I need an alignment after installation? A: Yes. A professional 4-wheel alignment is mandatory after replacing control arms. The E65/E66 uses a complex multi-link front suspension that requires precise alignment to prevent tire wear. Q: Will this fit 745Li long wheelbase? A: Yes. Both standard (E65) and l
directions_car Aplicación (referencias cruzadas)
1| Marca | OEM | |
|---|---|---|
| UNKNOWN | CA0017 | Ver ofertas |