Valve Covers, PCV Membranes and Oil Separators: Wholesale Sourcing Guide

On many engines designed in the last two decades the valve cover is no longer a simple lid: it is a molded plastic assembly that contains the oil separator and the crankcase pressure-regulating valve. That makes it a regular replacement item: the diaphragm inside the valve tears or the plastic warps, and the vehicle maker usually sells only the complete cover.

This guide covers the group as it is traded - complete valve covers (cylinder head covers), repair membranes for their PCV valves, standalone oil separators and crankcase breather hoses: how the designs differ and fail, which look-alike versions cause wrong orders, and which numbers registered buyers on ok.parts search for most.

34%of searches: VW / Audi numbers
63%of searches: valve covers
$10-40median cover prices, Oct 2026
93%of visible offers from China

Plastic cylinder head cover 11127553626 for BMW N43 four-cylinder engines

A typical modern plastic cylinder head cover: 11127553626 for the BMW N43 four-cylinder - see offers

1. What the Valve Cover and Crankcase Ventilation Do

Combustion gas that slips past the piston rings - blow-by - ends up in the crankcase. Positive crankcase ventilation (PCV) draws it back into the intake to be burned. On the way the oil mist it carries has to be separated and drained to the sump, and the crankcase held at a slight, stable vacuum at idle and under boost alike.

The valve cover - also listed as cylinder head cover, rocker cover or camshaft cover - sits at the top of this system. Depending on the engine it:

  • seals the top of the cylinder head, with a perimeter gasket and seals around the spark plug or injector wells;
  • carries the oil filler, ignition coil seats and sensor mounts;
  • contains the oil separator: baffles, a labyrinth or small cyclones molded into the underside and closed by a welded plate;
  • contains the pressure-regulating valve, a spring-loaded rubber diaphragm that throttles the path to the intake when manifold vacuum is high.

Where separator and valve are not built into the cover, they sit in a separate module connected by molded breather hoses.

2. Types and Designs

Plastic cover with integrated PCV
Plastic cover with integrated PCV
Glass-filled polyamide molding with separator and pressure-regulating valve inside: BMW N20, N54, B48, VAG 2.0 TDI, GM 1.4 Turbo.
Most searched
Aluminum cover
Aluminum cover
Die-cast, stable and rarely warps. Some, like the GM 1.6 / 1.8 cover shown, still carry a PCV diaphragm that fails like any other.
Rigid
Separate oil separator
Separate oil separator
A module with separator and regulating valve, bolted to the cover or block: VAG TSI engines, BMW M54 and N46, Volvo.
Bolt-on
Repair membrane
Repair membrane
Diaphragm, usually with a new cap and spring, to rebuild the valve in an otherwise sound cover.
Low cost

Shown: BMW N54 cover 11127565284, GM 1.6 / 1.8 aluminum cover 55564395, VAG TSI separator 06H103495AC and a membrane kit listed under GM number 55573746.

Three separation methods are used, often combined: a labyrinth of baffles that oil droplets collide with, a cyclone that throws them outward, and a fleece filter that catches fine mist in a replaceable element. Labyrinths and cyclones molded into a cover cannot be serviced, so a cover blocked with sludge is replaced, not cleaned.

Diesel covers are often larger moldings; on many common-rail engines they also seal around the injectors. A frequently searched example is LR004200, the cover of the 2.2 diesel in the Land Rover Freelander 2 and Range Rover Evoque.

Crankcase breather hose 06B103217M for the VW Passat 1.8T

Breather hose 06B103217M for the VW Passat 1.8T, the most-searched number of the group - see offers

3. How These Parts Fail

Torn diaphragm

The diaphragm flexes with every change of engine load, in hot oil vapor and fuel residue. When it tears, the intake manifold pulls air straight through the small vent hole in the valve cap: the engine gets unmetered air and the crankcase far too much vacuum. Typical signs:

  • a whistle or howl at idle that changes when the oil filler cap is lifted;
  • the filler cap held down hard by suction at idle;
  • rough or high idle, rising oil consumption and blue smoke;
  • on some engines a whistling or leaking rear crankshaft seal.

The fault codes are lean-mixture and idle codes: P0171 and P0174 (system too lean), P0507 (idle speed higher than expected), sometimes random misfire P0300. Some controllers also set P052E (PCV regulator valve performance); the GM 1.4 Turbo commonly logs the manufacturer code P1101. A quick check: with the engine idling, cover the vent hole on the valve cap with a fingertip. If air is being sucked in there, or the noise stops, the diaphragm is torn.

Clogged or frozen separator

The opposite failure is a blocked system. Short trips and cold weather leave condensate in the separator and hoses; mixed with oil it forms an emulsion that blocks the gas path and can freeze. Crankcase pressure then pushes oil out at the valve cover gasket, the crankshaft seals and the dipstick tube. A common workshop test is a thin rubber glove held over the open oil filler at idle: if it inflates, the crankcase is under pressure - a blocked breather or heavy blow-by from a worn engine.

Warped or cracked cover

With age and heat cycles the sealing flange of a plastic cover distorts and cracks appear at bolt bosses and around the coil wells. The symptom is an oil leak that returns soon after a new gasket is fitted.

Breather hoses harden, split at the corrugated sections and snap at the quick couplers when disturbed. A split hose sets the same lean codes as a torn diaphragm.

On the GM 1.4 Turbo a failed check valve inside the intake manifold is a widely reported cause of repeat diaphragm failure: it lets boost pressure into the crankcase. If the manifold is not checked, the new cover can go the same way.

Replace at the same time: cover gasket and plug-well seals if not supplied with the cover, and the breather hoses that have to be disconnected.

Oil separator 11617503520 for BMW N42 / N46 engines, from QUATTROFRENI, the private label of ok.parts - see offers
Oil separator 11617503520 for BMW N42 / N46 engines, from QUATTROFRENI, the private label of ok.parts - see offers
Fleece filter kit 11127793164 for older BMW diesels (E46, E39, E38, X5 E53) - see offers
Fleece filter kit 11127793164 for older BMW diesels (E46, E39, E38, X5 E53) - see offers
Oil trap 31338023 for the Volvo S60 and V70 - see offers
Oil trap 31338023 for the Volvo S60 and V70 - see offers

4. Complete Cover or Repair Membrane

About one search in seven within this group is for a number listed on the site as a membrane. The diaphragm is a small rubber disc, the cover it sits in costs many times more, and vehicle makers as a rule do not supply it separately.

A membrane kit is a legitimate repair when the cover is flat, uncracked and not sludged up, and the kit matches the valve: diaphragm diameter, center seat, spring and cap. Where the original cap is welded on, it has to be cut or pried off and the replacement must seal gas-tight - a leaking cap is the same fault as a torn diaphragm.

A complete cover is the right choice when the old one leaks at the flange, is cracked or sludged, or when the workshop has to warrant the job.

Membranes, gaskets and complete covers are all listed under the cover's OEM number. An offer at $2 on a number whose median is $30 is almost certainly a membrane or a gasket, not a bargain cover. Read the offer title before comparing prices.

5. Reading the Numbers and Avoiding Wrong Orders

Engine family, not car model. One body carries several engines with different covers. For the BMW 3 Series E90 alone, the ranking below contains 11127552281 for the N52, 11127548196 for the direct-injection N53, 11127565284 for the turbocharged N54 and 11127553626 for the four-cylinder N43. The six-cylinder covers look alike in a thumbnail and do not interchange. Order by VIN - see how to find an OEM part number.

VAG prefixes. In a VW group number the first three characters usually identify the engine family the part was first released for; the middle group 103 includes cylinder head covers and crankcase ventilation parts:

PrefixEngine familyExample from the ranking
03G2.0 TDI pump-injector03G103469R
03L1.6 / 2.0 TDI common rail03L103469S
0702.5 TDI five-cylinder070103469B
06H1.8 / 2.0 TSI (EA888)06H103495AC
0361.4 / 1.6 16V petrol036103464AH
04E1.2 / 1.4 TSI (EA211)04E103464AN

Suffix letters matter. Within one engine family the cover changes with installation (transverse or longitudinal), engine version and model year. The 03L common-rail cover alone is searched under at least four numbers, among them 03L103469L and 03L103469S; do not assume they interchange. V engines have two different covers, left and right.

Supersessions. Vehicle makers revise these parts often, and buyers search both old and new numbers: BMW 11127646552 replaced 11127603390, 11128581798 replaced 11128513755, and Nissan 13264JG30C replaced 13264JG30B. Ask the supplier which revision the tooling copies.

6. The Most-Searched Numbers on ok.parts

The table is ranked by repeat searches from registered buyers on ok.parts.

The brand mix is not the mix of cars on the road: VW group numbers account for about 34% of searches in this group and BMW / Mini for about 21%, followed by GM at about 9%, then Nissan, Ford and Volvo at 5-6% each.

By part name as listed on the site, about 63% of searches are for valve covers, 15% for oil separators, 14% for membranes and 9% for breather hoses. Yet the single most-searched number is a hose with a median offer price under two dollars in October 2026.

OEM numberBrandPartOffersMedian priceNotes
06B103217MVW / Audi / Skoda / SeatCrankcase breather hose, 1.8T7$1.42VW Passat B5.5
070103469BVW / Audi / Skoda / SeatCylinder head cover with breather valve, 2.5 TDI five-cylinder61$40.32VW Transporter T5, Touareg
31338023VolvoOil trap (crankcase oil separator box)8$18.22Volvo S60 and V70 of the 2000s; check engine type
11128581798BMW / MiniCylinder head cover, 2.0 diesel52$29.64B47, from 2014: 1 to 5 Series, 7 Series, X3, X4, X5
32140004VolvoOil trap with PCV diaphragm31$12.69Four-cylinder Drive-E petrol: S60, V60, XC60, S90, XC90
55564395GM (Chevrolet, Opel, Buick)Aluminum valve cover with PCV diaphragm27$13.141.6 / 1.8 Ecotec: Chevrolet Aveo, Sonic, Trax, Opel Astra
11617503520BMW / MiniOil separator / pressure-regulating valve22$6.72N42 / N46: E46, E87, E90, X3 E83, Z4 E85
55573746GM (Chevrolet, Opel, Buick)Plastic valve cover with PCV diaphragm30$13.291.4 Turbo: Chevrolet Cruze, Sonic, Trax
11127548196BMW / MiniCylinder head cover, six-cylinder77$35.02N53: E90-E93, E60 LCI, F10
13264JG30CNissan / InfinitiRocker cover, 2.5 petrol19$11.95QR25DE: Nissan Rogue (first generation); also listed for X-Trail T31
03L103469SVW / Audi / Skoda / SeatCylinder head cover with PCV valve35$23.89TDI common rail (03L family): Golf VI, Jetta, Passat, Beetle
11617501566BMW / MiniPressure-regulating valve (oil separator)108$3.73M52TU / M54: E46, E39, X5 E53, X3 E83, Z3, Z4
03G103469RVW / Audi / Skoda / SeatCylinder head cover with PCV valve19$27.622.0 TDI pump-injector (PD) engines
11127512839BMW / MiniCylinder head cover, six-cylinder28$28.00M54: E46, E39, X5 E53, X3 E83, Z4 E85
2241026860Hyundai / KiaRocker cover, 1.6 DOHC12$12.99Alpha 1.6: Kia Rio, Hyundai Accent (2005-2011)
036103464AHVW / Audi / Skoda / SeatOil separator, 1.4 / 1.6 16V petrol6$5.97VW, Audi, Seat and Skoda models with these engines
11127588412BMW / MiniCylinder head cover with PCV valve62$24.27N20 / N26: F20, F30, F10, X1 E84, X3 F25
11127565284BMW / MiniCylinder head cover, six-cylinder turbo27$32.10N54: 135i, 335i, 535i, 740i F01, X6 E71, Z4 E89
11127646552BMW / MiniCylinder head cover, 1.6 turbo34$24.64Mini R55-R61 with N18 engine
11127552281BMW / MiniCylinder head cover, six-cylinder89$32.70N52: E87, E90, E60, X1 E84, X3, X5 E70, Z4
06H103495ACVW / Audi / Skoda / SeatOil separator with pressure-regulating valve93$6.72EA888 1.8 / 2.0 TSI; several suffixes exist, match by VIN
11127553626BMW / MiniCylinder head cover, four-cylinder49$37.33N43: E81-E88, E90-E93, E60 LCI

Fitment notes name the main applications and do not replace a VIN check. Also frequently searched: cover 11127611278 for the BMW and Mini B48 2.0 petrol engine and the VW group breather hose 03H103202D.

Find suppliers by part number

7. Quality: Materials, Tests and Incoming Inspection

The molding

Plastic covers are injection-molded from heat-stabilized, glass-fiber-reinforced polyamide, commonly PA66 with around 30-35% glass fiber; the material code is molded into the part, for example >PA66-GF35<. A copy in a lower grade or regrind looks identical when new and warps sooner, so ask for the resin grade. Three details separate a careful copy from a quick one:

  • Flange flatness, checked on a fixture, not by eye.
  • Metal sleeves in the bolt holes. They limit how far the plastic is compressed; missing or short sleeves lead to cracked covers at fitting.
  • The welded baffle plate that closes the separator chamber. A poor weld lets oil mist bypass the separator and is found only by a leak test.

The diaphragm

This is the part that actually fails, and the easiest place to save money. It has to resist oil vapor, fuel condensate and blow-by acids, and stay flexible in frost. Fluorosilicone (FVMQ) is a common choice because it combines fuel and oil resistance with low-temperature flexibility. Plain nitrile rubber (NBR) hardens with heat and age, and ordinary silicone swells in fuel and oil. Ask for the compound data sheet. The spring matters too, since it sets the crankcase vacuum.

Gaskets and aluminum covers

Cover gaskets are commonly polyacrylate (ACM) or similar heat-resistant compounds; NBR gaskets are cheaper and harden sooner. On aluminum covers check for casting porosity and clean machining of the sealing face. Aluminum replacements are also offered for engines built with plastic covers; verify that their PCV valve and baffles match the original.

What to ask for and what to check

Ask whether every cover is leak-tested and the regulating valve function-tested, and whether the plant holds IATF 16949, the automotive quality management standard. On arrival (see also the inspection guide):

  1. Check the flange of a sample on a flat plate or with a straightedge.
  2. Confirm sleeves, gasket, plug-well seals and bolt count against the offer; trial-fit ignition coils, filler cap and hose couplers.
  3. Apply light suction to the outlet port with a hand vacuum pump: the valve should close or regulate, not pass air freely from the vent hole.
  4. Compare weight between samples and batches; a lighter part can mean thinner walls or a different material.

8. Wholesale Buying Notes

The figures are a snapshot of offers visible on ok.parts on 7 October 2026: median offer prices per number, not quotes.

Sub-typeMedian offer priceExamples
BMW plastic coversabout $24-37N20, N52, N53, N54, B47, B48
VAG four-cylinder TDI coversabout $21-29 (2.5 TDI five-cylinder about $40)03L103469 family, 03G103469R, 070103469B
GM, Nissan, Hyundai, Ford, Mazda coversabout $12-1955564395, 55573746, 13264JG30C
Oil separatorsabout $4-7; Volvo oil traps $13-1806H103495AC, 036103464AH, 11617503520
Breather hoses, valves, filter kitsabout $1.5-1206B103217M, 11127793164

Price spread. On BMW covers the same number showed offers from under $2 to over $400. The bottom of the range is gaskets and membranes listed under the cover number; the top is most likely genuine stock, as several of these numbers also carry offers under the vehicle maker's brand. Compare like with like - see OEM vs OES vs aftermarket; a genuine-branded cover at an aftermarket price is a case for the counterfeit parts guide.

Suppliers and MOQ. About 93% of the visible offers came from China and 7% from the United Arab Emirates; about 89% were listed by factories, the rest by wholesale companies and regional distributors. The most common minimum order quantities were 1, 10, 20, 30, 50 and 100. See factory vs trading company.

Packaging and freight. Plastic covers are bulky, light and fragile at the hose nipples: insist on individual cartons and plan freight by volume - see shipping auto parts from China and Incoterms for importers. Valve covers are generally declared under HS heading 8409 (parts of piston engines); hoses and separate separators may be classified elsewhere and national sub-codes differ, so confirm with your broker.

Warranty. Diaphragm failures show up in service, not at incoming inspection: agree the warranty period and the evidence required before ordering.

Combining an order. Covers sell together with their gaskets, plug-well seals, filler caps, breather hoses and ignition coils. If a number you need shows no suitable offer, post a buying request.

Post a buying request

9. Frequently Asked Questions

Can I replace only the PCV membrane instead of the whole valve cover?

Yes, if the cover itself is sound and the kit matches the valve exactly. A membrane will not fix a cover that leaks at the flange.

How do I tell a torn PCV diaphragm from a blocked breather?

A torn diaphragm gives too much vacuum: a whistle at idle, the filler cap held down by suction, lean-mixture codes. A blocked system gives pressure: oil leaks at gaskets and seals, fumes at the open filler.

Why does a new valve cover gasket not stop the oil leak?

On aged plastic covers the flange warps and cracks form at the bolt bosses, so a new gasket cannot seal. A blocked breather also pushes oil past a good gasket.

Are aftermarket plastic valve covers as good as the original?

They can be. It depends on the resin grade, the baffle-plate weld and above all the diaphragm compound, none of which shows in a photo. Ask for material data and test samples before a volume order.

Do valve covers come with gasket and bolts?

It varies by offer: bare, with gasket and plug-well seals, or with bolts and oil filler cap as well. Confirm the box contents in writing.

Related Guides